---
title: "Auto-Complete Gussets"
slug: "auto-complete-gussets"
updated: 2026-08-14T16:34:46Z
published: 2026-08-14T16:34:46Z
canonical: "docs.vention.com/auto-complete-gussets"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://docs.vention.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Auto-Complete Gussets

Learn how to use MachineBuilder’s Gusset Auto-Complete feature to efficiently place gussets and streamline your design process.

**Feature Overview**

This smart design feature automatically places internal gussets on fully closed rectangular extrusion loops and is always enabled within MachineBuilder.

**Using the Gusset Auto-Complete Feature**

1. Select the gusset you wish to use and move it to the internal joint intersection of the rectangular loop. The gusset will temporarily snap into place.

![](https://cdn.document360.io/3eee4d14-5ca0-4ea6-b426-1c19393e6a5e/Images/Documentation/image(648).png)

1. Hold **Ctrl** and left-click the checkmark on the screen to automatically place gussets at all four internal corners of the sub-assembly.

![](https://cdn.document360.io/3eee4d14-5ca0-4ea6-b426-1c19393e6a5e/Images/Documentation/image(649).png)

**Additional Information**

- The feature only works on fully closed rectangular loops.
- It is unsupported with these extrusion profiles: **247.5 x 247.5 mm**, **180 x 22.5 mm**, and **20 mm OD Round**.
- The feature supports all types of gussets.